PVC 45 degree elbow
YOST PVC 45 degree elbow is made of unplasticized polyvinyl chloride material.
Our metric 45-degree elbow pressure pipe fittings range from an outer diameter of 10mm. To outer diameter 400mm
A 45-degree elbow is a pipe fitting used to connect two pipes of the same diameter to form a 45-degree angle.
In order to perform this operation correctly, please make sure you read the assembly and connection step guide in our technical information to make sure you have the correct PVC solvent glue and cleaning agent for bonding the pipes and fittings together. These can be found in our "Metric Annex" section.
Dimensions (mm) |
---|
10MM PVC 45 DEGREE ELBOW |
12MM PVC 45 DEGREE ELBOW |
16MM PVC 45 DEGREE ELBOW |
20MM PVC 45 DEGREE ELBOW |
25MM PVC 45 DEGREE ELBOW |
32MM PVC 45 DEGREE ELBOW |
40MM PVC 45 DEGREE ELBOW |
50MM PVC 45 DEGREE ELBOW |
63MM PVC 45 DEGREE ELBOW |
75MM PVC 45 DEGREE ELBOW |
90MM PVC 45 DEGREE ELBOW |
110MM PVC 45 DEGREE ELBOW |
125MM PVC 45 DEGREE ELBOW |
140MM PVC 45 DEGREE ELBOW |
160MM PVC 45 DEGREE ELBOW |
180MM PVC 45 DEGREE ELBOW |
200MM PVC 45 DEGREE ELBOW |
225MM PVC 45 DEGREE ELBOW |
250MM PVC 45 DEGREE ELBOW |
280MM PVC 45 DEGREE ELBOW |
280MM PVC 45 DEGREE ELBOW |
315MM PVC 45 DEGREE ELBOW |
315MM PVC 45 DEGREE ELBOW |
355MM PVC 45 DEGREE ELBOW |
400MM PVC 45 DEGREE ELBOW |
description
Our series of PVC pressure pipes are made of unplasticized polyvinyl chloride material and withstand system pressure, with an operating temperature of +5°C to +60°C.
YOST has one of the largest series of PVC piping systems in the UK. All PVC piping and fittings in our range are fully matched, and most of them are WRAS certified.
The size of our PVC metric general pipe fittings starts from 10mm o.d. The outer diameter of 500mm depends on the situation, and it can usually be shipped from stock in the next day delivery service for orders placed before 5 pm the next day.
PVC is a lightweight pipe material, easy to install, long service life and durable.
The pressure ratings of our solvent welded metric joints can be found in the product information of each product. Our PVC metric general pipe fittings are manufactured in accordance with EN 1452-3 / ISO161/1 standards.