1. Material characteristics
PE-RT raw material is a heat-resistant reinforced polyethylene with very stable mechanical properties. Compared with ordinary polyethylene, PE-RT raw material has excellent toughness, stress cracking resistance, low temperature impact resistance, excellent long-term water pressure resistance and excellent creep and heat resistance. Our company uses 100% pure imported PE-RT raw materials, specializing in the production of PE-RT I and PE-RTII pipes and fittings, its performance is far higher than ordinary polyethylene materials.
2. Implementing Industry Standards
National Standard: GB/T 28799-2012, Enterprise Standard: Q/XJL 002-2014
3. Product Advantage
(1) High temperature resistance (up to 95 degrees C);
(2) High impact strength;
(3) Good flexibility at low temperature;
(4) Strong brittle crack resistance at low temperature;
Good creep resistance; Safety 1]
Glow bonding (repairing) property; long service life.
Excellent stress cracking resistance. When applied to outdoor pipeline network under 50 tons of gravity, it will only deform and not crack.
Good deflection, no leakage and crack will occur when the outdoor pipeline network is used in foundation settlement.
The use of fused connection, convenient, fast, high safety, maintenance-free later.
|
Item |
Model No. |
Size(mm) |
Packing(m/roll) |
|
PE-RT pipe for floor heating |
RHDN-1 |
16x2.0 |
300 |
|
RHDN-2 |
20x2.0 |
200, 300 |
|
|
RHDN-3 |
20x2.3 |
200, 300 |
|
|
RHDN-4 |
20x2.8 |
200,300 |
|
|
RHDN-5 |
25x2.3 |
200,300 |
|
|
RHDN-6 |
25x2.8 |
200,300 |
|
|
RHDN-7 |
32x2.9 |
200,300 |
|
|
RHDN-8 |
25x3.5 |
200,300 |
|
|
RHDN-9 |
32x3.6 |
200,300 |
4. Connection mode
Hot melt socket connection is used below dn63mm, which is low cost and easy to construct, and socket fusion connection is used between dn63mm and dn315mm.
