Description:
Polyethylene plastic-steel winding pipe is made of steel-plastic composite special-shaped strip by spiral winding and welding. Its inner wall is smooth and smooth. The specification is DN200-DN3200mm. This kind of pipe has the advantages of corrosion resistance, light weight, easy installation, large flow rate and long service life (50 years). It can replace the pipe made of high energy-consuming materials (cement, cast iron, ceramics, etc.). It is an environmentally friendly green product.
窗体顶端
Model |
specification(mm) |
Extruder |
Total Power Installed |
Max.output |
Dimensions |
|||
Model |
L/D |
(KW) Main Motor Power |
Heating Power(KW) |
|||||
SKGR |
Φ200-800 |
SJ90 |
30:1 |
75 |
30 |
230 |
260 |
10×21.5×2.6 |
SJ65 |
30:1 |
45 |
18 |
|||||
SKGR |
Φ400-1200 |
SJ90 |
34:1 |
110 |
30 |
300 |
500 |
10×23×2.7 |
SJ65 |
30:1 |
75 |
18 |
|||||
SKGR |
Φ900-1500 |
SJ90×30 |
30:1 |
110 |
30 |
450 |
600 |
28×18×6 |
SJ90×34 |
34:1 |
110 |
36 |
|||||
SJ65×30 |
30:1 |
75 |
18 |
|||||
SKGR |
Φ1200-2200 |
SJ120 |
30:1 |
185 |
60 |
500 |
700 |
30×20×7 |
SJ90 |
34:1 |
110 |
36 |
|||||
SJ65×30 |
30:1 |
75 |
18 |
|||||
SKGR |
Φ2200-3000 |
SJ150 |
30:1 |
280 |
80 |
650 |
800 |
32×20×8 |
SJ120 |
30:1 |
185 |
60 |
Connection mode
1、Clamp elastic connection
The connection method is suitable for plastic-steel wound pipes with diameter less than 1200 mm.
2、Electrothermal Melt Belt Connection
The connection method is suitable for plastic-steel wound pipes with diameter greater than 1200 mm.